Filter
Top Products
- 42
What to do, if ...
Problem Possible cause Remedy
The "Recording" menu point is not displayed in the
TV menu.
No video or DVD recorder logged in. Log in the video or DVD recorder in the connection
wizard and connect the device.
"Connections" cannot be called in the TV menu
(deactivated)
A time recording is in progress. Wait until the timer recording has ended or delete the
timer.
The control of the Loewe video recorder and the
timer do not work or do not work properly.
a) The Digital Link function is not activated or not
possible in the recorder.
b) Euro-AV cable is not connected.
c) Recorder is not logged in.
a) Activate Digital Link in the recorder (see operating
instructions of the video recorder).
b) Connect the Euro-AV cable.
c) Log in recorder.
General problems with connecting external
equipment via an AV input.
a) The device is not logged in to the connection
wizard or is connected differently than is shown
in the connection diagram.
b) The AV norm is set incorrectly.
c) The AV signal is set incorrectly.
a) In the connection wizard (TV menu –
Connections – New devices/modifi cations),
compare the connection diagram with the actual
installation and connect as shown, if necessary.
b) Set the norm correctly.
c) Set the AV signal correctly.
If "Automatic" is set for AV norm or AV signal, this
can lead to errors for signals which do not conform
to the norm. Then the norm and the signal are to be
set according to the specifi cations in the operating
instructions of the external device.
A decoder connection does not function or is faulty. a) The signal is not decoded because the wrong
decoder stations are selected in the connection
wizard.
b) The sound is missing in decoder mode because
the wrong decoder sound is assigned in the
connection wizard.
a) Follow the instructions in the connection wizard
again (TV menu – Connections – New devices/
modifi cations) and select the corresponding
decoder station.
b) Follow the instructions in the connection wizard
again and select the right audio source (decoder,
TV or autom.), see instructions of the decoder.
All menus appear in the wrong language. Menu language has been set incorrectly. Set your menu language:
Press the INFO button in TV mode (index). Select the
fi rst index item and call it by using OK. Then select
the language and confi rm with OK.