Filter
Top Products
28
Sound from PC or Set Top Box
Feed the analog audio signal from the PC or the STB to the sockets AUDIO
IN L/R on the TV via a cinch cable. The sound is reproduced by the TV speak-
ers.
If you have connected a digital external audio amplifi er, you can select
the digitla audio signal in the connection wizard (TV menu – Connections
– New devices/modifi cations) and assign it to the VGA/XGA socket. You
do the other settings for the audio amplifi er as described for the digital
amplifi er on page 26. The digital audio signal of the Set Top Box is fed in at
the AUDIO DIGITAL IN socket on the TV. The digital audio signal from the TV
AUDIO DIGITAL OUT is fed to the amplifi er.
Component Video connection
If you have a DVD player/recorder with Component OUT connections, you
can connect it to the SD/HD-COMPONENT IN sockets of the TV instead of
to the Euro AV sockets. The connecting cable with three cinch plugs each
transmits picture information. The playback is better quality than via the
Euro AV socket.
You need another cinch cable for the analog sound transmission. Connect
the analog audio outputs of the DVD player to the AUDIO IN L/R sockets on
the TV set. The sound is reproduced by the TV speakers.
If you want to use the digital sound of the DVD player with a digital audio
amplifi er connected to the TV, make a connection between AUDIO DIG OUT
of the DVD player and AUDIO DIGITAL IN of the TV set.
Log in the Component device in the connection wizard:
Assign the AUDIO DIG. IN input here, if a digital audio amplifi er is also
connected, to the COMP. IN socket. You do the other settings for the audio
amplifi er as described for the digital amplifi er on page 26.
Set the signal at the Component input in the connection wizard.:
Set to “Automatic“ fi rst. If the signal is not reproduced when playback is
started, consult the manual of the connected DVD device to fi nd out what
screen resolution is possible (SDTV, HDTV or ProScan).
Select the HDMI connection in the AV selection.
Call AV selection
VIDEOCOMP. IN
AVS
VGA/XGA
AV2
HDMI/DVI
AV selection
AV1
OK
3
3
H
Select COMP. IN sockets and with ...
call up
Start playback on the connected device.
Set geometry
Call the TV menu with the MENU button, select “Geometry“ with 34and
set:
If the picture is not positioned correctly you can move the picture horizon-
tally and vertically here so that it fi lls the whole screen. You can also set the
phase position so that the picture appears in the best possible quality.
Operating additional equipment
OK
OK
AV
V
–
o
n
i
Fu
32398_020 Xelos A32_37_Buch.indb 2832398_020 Xelos A32_37_Buch.indb 28 10.02.2005 11:10:09 Uhr10.02.2005 11:10:09 Uhr