Filter
Top Products
30
Problem
“Recording” is not displayed in the TV menu
“Connections” for example cannot be called in
the TV menu (grayed out)
The control of the Loewe video recorder and the
timer do not work or do not work properly.
General problems with connecting external
equipment via an AV input
A decoder connection does not function or is
faulty
All menus appear in the wrong language
What to do, if ...
Help
Log in the video or DVD recorder in the connection
assistent and connect the device.
Wait until the timer recording has ended or delete
the timer.
a) Activate Digital Link in the video recorder (see
operating instructions of the video recorder)
b) Connect the Euro AV cable
a) Compare the connection diagram with the
actual installation in the connection wizard and
connect as shown if necessary.
b) Set the standard correctly
c) Set the AV signal correctly
If “Automatic” is set for AV standard or AV signal,
this can lead to faults with signals which do not
conform to standard. Then the standard and the
signal are set according to the specifi cations in the
operating instructions of the external device.
a) Follow the instructions in the connection wiz-
ard again and select the appropriate decoder
programs.
b) Follow the instructions in the connection
wizard again and select the right audio soukrce
(decoder, TV or autom.), see instructions of the
decoder.
Set your menu language:
Press the INFO button in TV mode (index). Mark
the fi rst listing and call with OK. Then select the
language and confi rm with OK.
Possible cause
No video or DVD recorder logged in
A time recording is in progress
a) The Digital Link function is not activated or not
possible in the video recorder
b) Euro AV cable not connected
a) The device is not logged in in the connection
wizard or connected differently to shown in the
connection diagram.
b) The AV standard is set incorrectly
c) The AV signal is set incorrectly
a) The signal is not decoded because the wrong
decoder programs are selected in the connec-
tion wizard.
b) The sound is missing in decoder mode because
the wrong decoder sound is assigned in the
connection wizard.
Menu language has been set incorrectly
32398_020 Xelos A32_37_Buch.indb 3032398_020 Xelos A32_37_Buch.indb 30 10.02.2005 11:10:10 Uhr10.02.2005 11:10:10 Uhr