Filter
Top Products
English
8
AUDIO IN
R L
VIDEO
IN
TO TVINT IN
CH3 CH4
2
1
Connections
IMPORTANT!
– If your TV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the DVD
playback on the TV. See your
electronics retailer for details on RF
modulator availability and
operations.
Using an accessory RF modulator
1 Use the composite video cable (yellow) to
connect the DVD Player’s CVBS jack to
the video input jack on the RF modulator.
2 Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV’s
RF jack.
RF coaxial cable to TV
Back of RF Modulator
(example only)
Antenna or
Cable TV signal
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY ON on the DVD Player
front panel,
“NO DISC” may appear on the
display panel.
OPEN/CLOSE
OPEN/CLOSE
MIC LEVEL
STOP
STOP
PLAY/
PLAY/
PAU SE
PAUSE
S
TANDBY
-
ON
Connecting the power cord
~ AC MAINS
AUDIO
OUT
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
NO DISC
01-31 MDV434_LA_552a 02/03/05, 5:27 PM8