Filter
Top Products
User Guide
14
First setup panel
Setting Function Adjusting
LCD Sleep Sets how long the touchscreen Tap the LCD button and use
stays on. the Left and Right buttons.
LCD Light Sets how long the backlight of Tap the LCD Light button and
the touchscreen stays on. use the Left and Right buttons.
Button Light Sets how long the backlight of Tap the Button Light button and
the direct-access and Left/Right use the Left and Right buttons.
buttons stays on.
Touch Selects the beep volume (Off, 1,2,3) Tap the LCD button.
for Touch Screen buttons
Button Selects the beep volume (Off, 1,2,3) Tap the LCD button.
for Hard buttons.
Note: Use the down scroll arrow to move to the second
setup panel.
Second setup panel
Setting Function Adjusting
Mode Menu Active Deactive - Turns off the Mode Menu Icon so the user cannot access
SETUP, LEARN, LABEL etc. Good when children are tech-savvy.
Active - Normal. Anyone can program or adjust the Remote by tapping on
the Mode Menu icon.
SPECIAL NOTE To access the MODE menu after deactivating it, press and hold the spot
where the Mode Menu icon used to be for five or six seconds.
Macro Menu Active DeActive - Turns off Macro Navigation.Tap the LCD button
Active- Turns on Macro Navigation. repeatedly.
Device Menu Active DeActive - Turns off Device Navigation.Tap the LCD button
Active- Turns on Device Navigation. repeatedly.
Calibrate Calibrates the touchscreen. Tap the Calibrate button and
follow the on-screen
instructions.
Revert* Reverts the RC9200/5200 to Tap the Revert button and
the Revert 2.01 configuration follow the on-screen
(see pages 15, 17 and 57). instructions.
*The Revert button will only appear if one change has been made to the RC9200/520o
Getting Started