Memorex MT1120A Flat Panel Television User Manual


 
11
ENGLISH
TROUBLESHOOTING GUIDE
Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS POSSIBLE SOLUTIONS
•Make sure the power cord is plugged in.
•Try another AC outlet.
•Power is off, check fuse or circuit breaker.
•Unplug unit for an hour, then plug it back in.
•Station or CATV experiencing problems, tune
to another station.
•Check sound adjustments (Volume and
Muting).
•Check for sources of possible interference.
•Station or CATV experiencing problems, tune
to another station.
•Check antenna or CATV connections, reorient
antenna.
•Check for sources of possible interference.
•Check picture control adjustments.
•Station or CATV experiencing problems, tune
to another station.
•Station signal is weak, reorient antenna to
receive weaker station.
• Check for sources of possible interference.
•Station or CATV experiencing problems, tune
to another station.
•Make sure channels are set into memory.
•Check picture control adjustments.
•Check antenna or CATV connections, reorient
antenna.
•Check for sources of possible interference.
•Station or CATV experiencing problems, tune
to another station.
•Make sure channels are set into memory.
•CATV company is scrambling signal.
•Check antenna orientation.
•Check all CATV connections.
•Set TV/CATV menu option to the CATV mode.
•Station or CATV system problems, try another
station.
•Check antenna connections, reorient antenna.
•Check for sources of possible interference.
Poor sound
or No sound
Poor picture
or No picture
Horizontal or
diagonal bars
on screen
No Remote
operation
•Select proper language in the menu options.
Display is not
shown in your
language.
No reception
above
channel 13
No CATV
reception
•Batteries are weak, dead or inserted
incorrectly.
•Remote is out of range, move closer to TV
within 15 feet.
•Make sure Remote is aimed at sensor.
•Confirm there are no obstructions between the
Remote and the TV.
•Make sure the power cord is plugged in.
•Make sure TV/CATV menu option is in the
appropriate mode.
•If using antenna, check UHF antenna
connections.
•No broadcast on station tuned.
•Sleep Timer is set.
•Power interrupted.
TV shuts off
•TV station experiencing problems or program
tuned is not closed captioned. Try another
channel.
•Check CATV connection or VHF/UHF antenna,
reposition or rotate antenna.
•Press TV/CAPTION/TEXT button to turn on
the closed caption decoder.
Closed -
Caption is
not activated.
SYMPTOMS
POSSIBLE SOLUTIONS
SPECIFICATIONS
AC Power Input: 120 V, 60 Hz
AC Power Consumption: 95W
Chassis Construction: IC Solid state
Picture Tube: 20" (measured diagonally)
Audio Power Output Rating: 2.5 + 2.5 W
Speaker: 6-1/3" x 2-1/4" Full Range, 32 ohm x 2
Tuner Type:
181 Channel, Quartz PLL Frequency Synthesized
Remote Control: 2 x AAA batteries (not included)
Receiving Channels:
VHF 2-13
UHF 14-69
CATV 01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)
Antenna Input Impedance: 75 ohm (VHF/UHF/CATV)
Coaxial Input
Dimensions: 23-5/8" (W) x 17-9/16" (H) x 18-7/8" (D)
Weight: 46.3 Ibs
ACCESSORY: Remote Control
TV does not
operate
Picture
wobbles
or drifts
Poor color or
no color
Poor recep-
tion on some
channels
3G81501A E 12/8/99, 10:12 AM11