Filter
Top Products
4
POWER VOLUME CHANNEL
REMOTE SENSOR
VIDEO INL–AUDIO
(MONO)
IN–R
OUT IN
VIDEO
AUDIO
R
L
MONO
FEATURES
LOCATION OF CONTROLS
1.POWER Button - Press to turn the TV on or off.
2.VOLUME ▲ / ▼ Buttons - Press to raise or lower
the volume of the sound.
3.CHANNEL ▲ / ▼ Buttons - Press to select a higher
or lower numbered channel set into memory.
4.Remote Sensor - Signals from the Remote Control
unit are received here.
5. AUDIO (L / R) / VIDEO IN Jacks - Audio and video
signal cables from an external source can be
connected here.
• 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that
are available in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies
plus up to 113 cable channel frequencies. The actual number of channels received depends upon channel
reception in your area or your cable system.
• On-Screen 3 Language Display - Consists of channel, sleep timer, volume level, muting, text/caption indicators
and picture control adjustments. These can be displayed in English, Spanish or French.
• Sleep Timer - Operable from the remote control, this TV can be programmed up to 120 minutes to turn off
automatically.
• Memory Back Up - This system prevents loss of memorized channel selections in case a power interruption to the
TV should occur.
• V-Chip - The V-Chip function can rate a TV program or movie content. It allows you to set a restriction level.
• Picture Control Adjustments - The On-Screen display allows precise remote control adjustment of
BRIGHTNESS, COLOR, CONTRAST, SHARPNESS and TINT.
• Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing impaired
viewers.
• Stereo/SAP Reception - This TV designed to receive stereo and separate audio program (SAP) broadcasts where
available.
6. AC Power Cord - Plug into an outlet haveing 120V,
60 Hz AC power only.
7. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF
antenna or CATV cable to this jack.
8. AUDIO (L / R) /VIDEO OUT Jacks - Used to output
audio and video signals to a TV, amplifier or VCR.
9. AUDIO (L / R) /VIDEO IN Jacks - Audio and video
signal cables form an external source can be
connected hear.
7 8 96
FRONT
BACK
1
3
4
2
5
3G81501A E 12/8/99, 10:11 AM4