Metrologic Instruments MX009 Cable Box User Manual


 
8
CONFIGURING FOR USB KEYBOARD EMULATION (MX009-2XX7X)
PowerLink Compatible Scanners
These Metrologic Scanners, used with the MX009 Cable must be reconfigured
using the following bar codes before the MX009 can communicate properly with
a host system.
MS9500 Voyager
®
Series MS6220 Pulsar
®
MS7100 Orbit
®
MS3580 QuantumT
MS7220 Argus
SCAN
®
IS3480 QuantumE
MS6520 Cubit
®
IS4225 ScanGlove
IS6520 Cubit
®
All MetroSelect Compatible Scanners
Note: Configuration for USB Keyboard Emulation must be completed before
enabling/disabling any additional features documented in the
configuration guide provided with the scanner.
Important: When enabling/disabling additional features do not scan the
Recall Defaults bar code. If the Recall Defaults bar code is
scanned, all USB Keyboard Emulation configurations will
be lost and the process will have to be restarted.
Scan the following bar codes in numbered sequence.
1.
ENTER/EXIT
C
ONFIGURATION MODE
³999999
2.
RECALL DEFAULTS
³999998
3.
LOAD USB DEFAULTS
³999978