Metrologic Instruments MX009 Cable Box User Manual


 
11
CONFIGURING FOR USB KEYBOARD EMULATION (MX009-2XX7X)
MS6720, MS860, AND TECH SERIES
These Metrologic Scanners, used with the MX009 Cable must be reconfigured
using the following bar codes before the MX009 can communicate properly with
a host system.
MS6720 MS860 Tech Series
Note: Configuration for USB Keyboard Emulation must be completed before
enabling/disabling any additional features documented in the
configuration guide provided with the scanner.
Important: When enabling/disabling additional features do not
scan the
Recall Defaults bar code. If the Recall Defaults bar code is
scanned, all USB Keyboard Emulation configurations will
be lost and the process will have to be restarted.
Scan the following bar codes in numbered sequence.
1.
E
NTER/EXIT
C
ONFIGURATION MODE
0
12345 66666
7
2.
R
ECALL DEFAULTS
0
12345 66661
2
3.
E
NABLE RS-232
0
12345 30955
7
Continued on next page.