Filter
Top Products
25
ADDITIONAL BAR CODES
Some Metrologic scanners require alternate configuration steps than the steps
found on pages 8 - 18. If your scanner was manufactured before May 2002 or
does not accept the standard configuration sequences, you may need to use one
of the alternate configuration methods listed on the following pages. Contact a
Metrologic customer service representative to help determine if your scanner
requires one of these methods.
Alternate Configuration for USB Keyboard Emulation (MX009-2xx7x)
PowerLink Compatible Scanners
1.
ENTER/EXIT
C
ONFIGURATION MODE
³999999
2.
RECALL DEFAULTS
³999998
3.
ENABLE RS-232 MODE
³415554
4.
ENABLE XON/XOFF
HANDSHAKING
³115914
5.
ENABLE ACK/NAK
³115913
6.
CONTROL V
³80350220