Filter
Top Products
English-9
Part Names and Functions
Control Panel
1) POWER
Switches the power on/standby.
2) MUTE
Switches the audio mute ON/OFF.
3) INPUT
Switches between input sources.
Acts as SET button within the OSD menu.
4) PLUS (+)
Increases the setting adjustment within OSD menu.
5) MINUS (-)
Decreases the setting adjustment within OSD menu.
6) UP ( )
Increases the volume level when the OSD is o .
Moves area up to select which setting to is to be adjusted
within OSD menu.
7) DOWN ( )
Decreases the volume level when the OSD is o .
Moves down to select which setting is to be adjusted within
OSD menu.
8) EXIT
Activates the OSD menu when the OSD menu is o .
Exits from the current menu being displayed to the
previous menu within the OSD.
9) Remote control sensor and Power indicator
Receives the signal when using the wireless remote control.
Glows green when the monitor is active. Glows red when
the monitor is in Standby mode. Glows Amber when the
monitor is in POWER SAVE mode.
A red blinking Power indicator means that the monitor has
detected a failure. Contact quali ed personnel in case of
failure.
10) Main Power Switch
Seesaw switch to turn the main power on/o .
Mode Status indicator light
Power On Green
Standby Red
Power save Amber
Diagnosis
(Detecting failure)
Red blinking
EXIT MUTEINPUT
1
9
2
3
45
6
7
8
OFFON
10
NOTE:
The POWER button does not completely turn off the
display. Use the Main Power Switch to completely turn off
the display.