Filter
Top Products
14
Searching for Your Code
If your Television, Video Recorder or Satellite Receiver does
not respond to the BIG EASY after you have tried all the codes
listed for your brand, try the Search Method. The Search
Method may also work if your brand is not listed at all.
Let's say you cannot get your BIG EASY to control your
Television:
Switch your Television on.
Press the TV key on your BIG EASY.
Aim the BIG EASY at your Television.
Press and hold MAGIC until the BIG
EASY’s red light blinks twice. Then, press
9 9 1. The red light will blink twice.
Now, alternate between TV and POWER,
over and over, until your Television turns
off. You may have to press these keys
many times, so please be patient.
Remember to keep pointing the BIG
EASY at your Television when you press
the TV and POWER keys.
When your Television turns off,
press MAGIC. Don't forget, press MAGIC
as soon as your Television turns off.
Now your BIG EASY is ready to run your
Television.
To search for the code for your Video Recorder, Satellite or
Cable Box, follow the instructions above, only press the VCR
or SAT key during steps 2 and 4.
Note: If your Video's original remote control does not have
a power key, press PLAY instead of POWER when searching
for your code.
Trouble-Shooting
TV
MAGIC
1
2
3
TV
MAGIC
5
4