One for All URC-2585 Universal Remote User Manual


 
Code Blink Out
Even if you have used the Search Method, it is handy to know
your Television, Video, Satellite or Cable code for future
reference. It's easy to get your code after you have set up
your device.
To blink out your Television code:
Press TV.
Press and hold MAGIC until the BIG
EASY’s red light blinks twice. Press 9 9 0.
The red light will blink twice.
For the first digit of your three-digit
code, press 1 and count the red blinks.
If there are no blinks, the digit is "0".
For the second digit, press 2 and count
the red blinks.
For the third digit, press 3 and count the
red blinks. Now you have found your
three-digit code.
Make sure you write your device code in the three boxes on
page 18.
To blink back the code for your Video, Satellite or Cable Box,
follow the instructions above only press VCR or SAT during
step 1.
15
Trouble-Shooting
5
3
4
1
2
TV
MAGIC