One for All URC-7540 Universal Remote User Manual


 
27
Scan
Your ONE FOR ALL 4 comes with a special Scan function which
lets you “scan” through every programme available on your
TV, VCR, Satellite or Cable Box.
For example, to scan the programmes on your TV:
Aim the ONE FOR ALL 4 at your TV. Press
the TV key. Press and release MAGIC
then press the MUTE key.
The ONE FOR ALL 4 will send the
command to advance through all the
programmes available on your Television
stopping at each programme for about
three seconds. Remember, you must aim
the ONE FOR ALL at your device the
entire time you are using Scan.
When you find a programme you would
like to watch, simply press the device key
you are using (TV, VCR, SAT). In this case
press the TV key.
Programme Scan
2
1
Important notes:
- To use Scan with your VCR, Satellite or Cable Box, follow the
same instructions above, only press the VCR or SAT key during
step 1 and 2.
- Scan may not function with devices that did not have a
programme +/- key on the original remote control.