One for All URC 3030 Easy 3 Universal Remote User Manual


 
Features and Functions
The illustration below and chart on the next page describe the
features and functions of the One For All® Easy 3 Device
universal remote control.
Feature Function
POWERSETUP
TV VCR
CBL
CH
-
REC PAUSE
PLAY
REW FF
STOP
VOL
2
4
1
VOL
CH
+
3
M
Stop Key
Play Key
Red Light
(LED)
Setup
Key
TV Key
Power
Key
CBL Key
VCR Key
Volume
and
Channel
Glow Keys
Record
Key
Rewind
Key
Fast
Forward
Key
Pause Key
Mute
Glow Key
The LED flashes red to show that the
remote is working.
The TV, VCR and CBL keys are used to
select the home
entertainment device you want to control.
The POWER key operates the same as on
your original remote.
The SETUP key is used to set up your
devices.
The Glow Keys: VOL (Volume), CH
(Channel), and M (Mute) operate the same
as on your
original remote. To activate the "Glow"
Feature, you must expose the Glow Keys
to bright light. The length of time the
Glow Keys remain illuminated will be
determined by the length of time the
remote is exposed to bright light. These
keys are also used to enter set-up codes for
your devices.
The REW (Rewind), FF (Fast Forward),
STOP, PLAY, PAUSE and REC (Record)
keys control the same functions as those
found on your VCR remote.
RED Light (LED)
POWER
SETUP
CH
-
VOL
2
4
1
VOL
CH
+
3
M
TV VCR CBL
REW FF STOP
PLAY PAUSE REC
Overview:
Thank you for purchasing the One For All® Easy 3 Device
universal remote. Before you can use your new
remote, you will need to program it. To do this, you need to tell
the remote what equipment you wish to operate. This is done by
following these three easy steps.
Step 1: Install two (2) new AAA alkaline batteries.
Step 2: Look up the code for your TV, VCR or Cable Box.
Step 3: Enter the code.
User Manual
Previous Model Name:
So Easy
URC 3030
Easy 3
3031 / 3032 / 3033 / 3034