Filter
Top Products
26
BASIC OPERATIONS
Disc Playback
DVD-A
SACD
POWER
EJEC
T
STOP
PLAY
1． Press the POWER button to turn on the DVD player.
2． Press the OPEN/CLOSE (EJECT) button to eject the disc tray.
3． Place the disc with the label side facing up and the recorded side
facing down.
4． Press the OPEN/CLOSE (EJECT) button again to retract the tray.
5． The DVD player reads disc information and starts playback.
6． Depending on the content of the disc, a menu or navigation screen
may appear. Please use the navigation ARROW and SELECT
buttons to select the content to play.
7． To stop playback, press the STOP button.
• During DVD playback, pressing the STOP button for the
first time brings the DVD player to a pre-stop mode. You
can resume playback from the stopped point by pressing
the PLAY button. This pre-stop mode allows you to
change the player settings and then resume playback.
• To completely stop playback, press the STOP button twice.
8． To turn off the player, press the POWER button.
• This unit consumes a small amount of power even when it
is turned off to STANDBY mode. To save power when the
unit is not to be used for a long time, unplug it from the
household AC outlet.
DVD Menu Playback
DVD-A
TITLE
NUMBERS
PLAY
ARROW
SELECT
MENU
RETURN
1. Some DVD discs contain title menu or chapter menu functions.
2. Press the MENU button on the remote control to display the
menu on the TV screen.
3. Make menu selections using the number buttons or navigate the
menu using the ARROW buttons, and then press the PLAY or
SELECT button to make the selection.
You may also:
• Press the TITLE button to return to the disc title menu.
• Press the MENU button to return to the initial menu.
• Press the RETURN button to return to the previous menu. The return location varies with discs.