Filter
Top Products
35
EN
WATCHING TVINTRODUCTION PREPARATION INITIAL SETTING
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
Symptom Remedy
You switch to a different input and
the volume
This unit will memorize the volume level from the last time you adjusted it.
If the volume of the sound from another device is higher or lower, then the
loudness will change.
•
•
You switch to a different input and
the screen size changes
This unit will memorize the viewing mode from the last time you used the
particular input modes.
•
The display image does not cover
the entire screen
If you are using the unit as a PC monitor, make sure that “Horizontal Position” and
“Vertical Position” in “PC Settings” are set correctly.
If you are watching TV or using the video, S-video, component or HDMI with 480i
input, use [SCREEN MODE
] repeatedly to switch various screen modes.
•
•
Captions are displayed as a white
box.
No caption is displayed in the
Closed Caption-supported
program.
Interference from buildings or weather conditions may cause captioning to be
incomplete.
Broadcasting station may shorten the program to insert advertisement.
The closed caption decoder cannot read the information of the shortened
program.
•
•
No caption is displayed when
playing back the discs or cassette
tape containing captions.
The disc or cassette tape may be illegally copied, or the caption signal might not
have been read during copying.
•
Black box is displayed on the TV
screen.
The text mode is selected for caption. Select “CC1”, “CC2”, “CC3”, “CC4” or “Off”.•
Note:
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of
blue, green or red. This is not to be considered a defect in the LCD screen.
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for more
details on correct operations.
•
•