Filter
Top Products
100
Troubleshooting (cont’d)
Others
Recording Error
Disc is full.
Recording Error
You cannot record more
than 99 titles on one disc.
Recording Error
You cannot record more the
999 chapters on one disc.
Recording Error
You cannot record on this disc
as Control Information is full.
Recording Error
You cannot record on the
disc as Power Calibration
Area is full.
You are trying to record onto
the disc which has no space
for recording.
Insert the recordable disc with
enough recording space.
Recording Error
This disc is already finalized.
CauseError message Solution
You are trying to record onto the
disc on which the number of
recording titles comes up to the
maximum (99).
You are trying to record onto the
VR mode DVD-RW disc on which
the number of recording chapters
comes up to the maximum (999).
This disc has no space to write
the Control Information when
recording or deleting contents.
When editing has been repeatedly
performed, the control Information
area may come up to be full even
the recording area has enough space.
This disc's working area for
recording is full.
When recordings are performed
repeatedly onto an unstable disc,
this area may come up to be full.
You are trying to record onto
the disc already finalized.
Delete unnecessary titles
(pages 61, 65, 74).
Delete unnecessary chapter
markers (pages 69, 78).
Delete unnecessary titles
(pages 61, 65, 74).
Insert a new disc.
Release the finalizing for this disc
(page 41).
(No area for new recording)
(The maximum is 99)
(The maximum is 999)
You can watch the TV programs with the tuner of the
unit. (Usually channel 3 or 4 of the TV is available for
the RF converter setting.) Be sure to connect the unit
to a TV using the RF cable. Refer to page 13.
1
Select channel 3 on your TV.
• Be sure that the unit is in DVD mode.
2
Press VIDEO/TV button on the remote control.
• If noise appears, change the RF output channel
of the unit to CH 4 by pressing VIDEO/TV but-
ton for 3 seconds.The RF output channel will
alternate between CH3 and CH4 as follows.
• Changing the RF output channel is available only
when the unit is in DVD mode.
for more than
3 seconds
RF converter output
POWER
REC SPEED
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C-RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
2
SPACE
VCR
456
78
0
9
CH
VIDEO/TV
SLOW
PAUSE
GHI JKL MNO
PQRS
DISPLAY
TUV WXYZ
DVD
(
RF on
)
CH4
3 seconds
(
RF on
)
CH3
(
RF on
)
CH4
3 seconds
3 seconds
3 seconds
*
If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized service center.