Panasonic AJ-D440 VCR User Manual


 
– 42 –
Setup menus
The underline on the setting item denotes the initial setting.
* The Setup menu can only be displayed for the model AJ-D450.
Item Setting
No.
Superimposed
display
Description
No.
Superimposed
display
USER menu
<AUDIO> (continued)
718 DV
OUTPUT
0000
0001
0002
ST1
ST2
ST1+2
This selects the AUDIO CH1 and CH2 output signals during
DV or DVCAM format playback.
0:
1:
2:
The CH1 track signals are output to CH1 and the CH2
track signals to CH2. (Only the sound during shooting is
output.)
The CH3 track signals are output to CH1 and the CH4
track signals to CH2. (Only the audio dubbing sound is
output.)
The mixed CH1 and CH3 track signals are output to CH1
and the mixed CH2 and CH4 track signals to CH2. (The
sound during shooting and audio dubbing sound are
output simultaneously.)
719 PB FADE 0000
0001
0002
AUTO
CUT
FADE
This selects the processing method for the audio edit points
(IN point, OUT point) during playback.
0:
1:
2:
According to the status during recording. (Setup menus
No. 309, 310)
Forced CUT
Forced FADE
720 EMBEDDED
AUD
0000
0001
OFF
ON
This selects whether to superimpose the audio data onto the
serial output.
0:
1:
Data is not superimposed.
Data is superimposed.
716 REC CUE 0000
0001
0002
CH1
CH2
CH1+2
This selects the input signal recorded in CUE.
0:
1:
2:
The signal selected by SETUP-MENU No. 714 is recorded
on CH1.
The signal selected by SETUP-MENU No. 715 is recorded
on CH2.
The signal selected by SETUP-MENU No. 714 and No. 715
are mixed and recorded on CH1 and CH2.
721 LINE CH
SEL
0000
0001
PCM
AUTO
This selects the audio output (LINE OUT).
0:
1:
PCM AUDIO or QUICK PCM AUDIO is output.
Whatever is selected by SETUP-MENU No. 713 (MONI
CH SEL) output.
722* INT SG 0000
0001
OFF
ON
This selects whether the internal signal is to be used for the
audio input signal.
0:
1:
The internal signal is not selected.
The internal signal is selected.
This item setting is valid only when the tape recorded on the four channels of the DV or DVCAM
format is played back.
<Note>
This item is valid when both optional serial interface and optional digital audio interface boards
have been installed.
<Note>
The PCM AUDIO or QUICK PCM AUDIO output is not affected by the AUDIO MONITOR
SELECT SW, and CH1 and CH2 are output independently.
<Note>
The internal signal has a frequency of 1 kHz.
<Note>
723 DV PB ATT 0000
0001
OFF
ON
This selects the audio output level for DV format playback.
0:
1:
The audio output level is not attenuated.
The audio output level is attenuated (reduced).
As indicated below, whether the setting takes effect or not depends on the size of the cassette
tape used.
1. When an “L” size cassette is used
The setting takes effect only when “DV” has been selected as the setting for setup menu
No. 108 (FORMAT SEL).
2. When an “M” size cassette is used
The setting does not take effect.
3. When an “S” size cassette is used
The setting takes effect only when “DV” has been selected as the setting for setup menu
No. 108 (FORMAT SEL).
<Notes>