Filter
Top Products
– 53 –
Error messages
When a warning occurs in this unit, an error number appears at the counter display.
Opening the DIAG menu will display the error description on the monitor. Also, when an
abnormal operation is detected in this unit, an error number flashes on the counter display.
This display the VTR information.
VCR information includes “WARNING” information and “HOURS METER” (usage time)
information. A DIAG menu appears on the monitor when the monitor is connected to the
VIDEO OUT 3 connector on the connector section.
DIAG menu
Press the DIAG button.
The DIAG menu screen is displayed on the monitor, and the error number is displayed
on the counter display.
The “WARNING” information and “HOURS METER” information can be switched by
pressing the cursor buttons ( , ).
Press the DIAG button again to return to the original display.
1
2
3
Displaying the DIAG menu
“WARNING” information display
•
A warning message is displayed on the monitor whenever a warning occurs. When
warnings have not been detected, “NO WARNING” is displayed on the monitor, and “Err–”
is displayed on the counter display.
•
When multiple warning occur, the descriptions for each warning can be checked by using
the cursor buttons ( , ).
1, 3
ON
OFF
POWER
EJECT
RECPLAYFFSTOPREW
COUNTER/
REMAIN
RESET
CH CONDITION
LEVEL
HEADPHONES
CH 1
AUDIO
REC LEVEL
CTL
TC
UB
CH 1
MIX
CH 2
INT
EXT
TC
AUDIO
MONITOR
DIGITAL
ANALOG
Y PB PR
CMPST
S-VIDEO
DIGITAL
AES/EBU
ANALOG
REMOTE
LOCAL
MENU
PAGE
TC
PRESET
FILE
SET
DIAG
VIDEO IN
AUDIO IN
CH 2
2