Filter
Top Products
Setup menus
– 58 –
USER menu
<BASIC> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
004 LOCAL 0000 DIS
ENA
0001 ST&EJ
0002 ENA
005 TAPE 0000 ±12h
TIMER 0001 24h
006 SUPER 0000 OFF
0001 ON
007 CHARA 0000 WHITE
TYPE 0001 W/OUT
008 REMAIN 0000 OFF
SEL 0001 ON
009 SETUP 0000 OFF
NUMBER 0001 ON
010 MONI 0000 MANU
CONTROL 0001 AUTO
The underline on the setting item denotes the initial setting.
This selects the buttons which can be operated on the front
panel when the REMOTE/LOCAL switch has been set to
REMOTE.
0: No buttons can be operated.
1: Only the STOP and EJECT buttons can be operated.
2: All buttons except for the RECORDER and PLAYER
buttons can be operated.
This selects the 12 or 24 hour display for the CTL counter.
0: 12 hour display
1: 24 hour display
This selects whether the time code and other super display
which are output to the VIDEO OUT 3 connector is to shown.
0: Not shown.
1: Shown.
This selects the display type for the super display output to the
VIDEO OUT 3 connector as well as for displays such as the
setting menu, etc.
0: White characters against a black background.
1: White characters with a black border.
This selects whether the remaining tape time is shown on the
front panel.
0: Not shown.
1: Shown.
When “T&S&M” is selected as the setup menu item No. 003
(DISPLAY SEL) setting, the remaining tape time is displayed
on the third line of the VIDEO OUT 3 connector superimposed
display in place of the mode display.
<Note>
Even when “1” (ON) is selected, the remaining tape time is not
shown while the unit is calculating the remaining tape time
after ejecting or inserting the cassette.
This selects whether the SETUP-MENU No. is displayed on
the front panel.
0: The SETUP-MENU No. is not displayed.
1: The SETUP-MENU No. is displayed.
This sets whether the recorder is to be forcibly set to the EE
mode and the player’s playback signals are to be output to the
monitor by pressing the recorder’s PLAYER button when a
monitor has been connected only to the recorder during deck-
to-deck editing.
0: The recorder is not forcibly set to the EE mode.
1: The recorder is forcibly set to the EE mode, and the
player’s playback signals are output.