Filter
Top Products
Setup menus
– 76 –
USER menu
<V BLANK> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
802 TELETEXT 0000 MOJI
SEL
0001 NABTS
803 TELETEXT 0000 OFF
DET 0001 AUTO
0002 MANU
Sub screen
00 REC LINE1 0000 OFF
: : 0001 10&273
: : 0002 11&274
: : 0003 12&275
: : 0004 13&276
: : 0005 14&277
: : 0006 15&278
: : 0007 16&279
: : 0008 17&280
: : 0009 18&281
: : 0010 19&282
: : 0011 20&283
: : 0012 21&284
12 REC LINE13 0013 22
804 BLANK LINE 0000 BLANK
0001 THRU
0002 MANU
The underline on the setting item denotes the initial setting.
For selecting the type of teletext signals to be recorded.
0: MOJI system
1: NABTS system
This selects the method used to detect the lines in which the
teletext signals are to be recorded.
0: The teletext signals are not recorded.
1: The teletext signals are automatically detected and re-
corded.
2: The lines in which the teletext signals are to be recorded
are selected and set.
<Notes>
• When setting “1 (AUTO)” is selected, it may not be possible
to record the teletext signals in all the lines depending on the
setting of setup menu item No. 800 (ADD LINE).
• When setting “2 (MANU)” is selected and the STOP button is
pressed, operation transfers to the sub-screen, and the
number of recording lines can be selected.
To return from the sub-screen, press the STOP button again.
• The number of lines in which the teletext signals can be
recorded depends on the setting of setup menu item No. 800
(ADD LINE).
This selects the lines in which the teletext signals are to be
recorded.
Factory mode settings REC LINE1: OFF
REC LINE2: OFF
REC LINE3: OFF
REC LINE4: OFF
REC LINE5: OFF
REC LINE6: OFF
REC LINE7: OFF
REC LINE8: OFF
REC LINE9: OFF
REC LINE10: OFF
REC LINE11: OFF
REC LINE12: OFF
REC LINE13: OFF
This selects blanking ON or OFF for the vertical blanking
period of the video signals.
0: Blanking is effected forcibly for all lines.
1: No blanking is effected for any of the lines.
2: Blanking ON or OFF is selected for each line.
<Note>
When setting “2 (MANU)” is selected and the STOP button is
pressed, operation transfers to the sub-screen, and ON or
OFF can be selected for each line. To return from the sub-
screen, press the STOP button again.