Panasonic AJ-D950 VCR User Manual


 
Setup
(default settings)
The units major settings are performed by making selections on menus.
The setting menus appear on the TV monitor when the TV monitor and VIDEO OUT 3
connector in the units connector area are hooked up.
Changing the settings
Press the MENU button.
The setup menu appears on the TV monitor and setup menu No. appears on the
counter display. (If the setup has already been performed, the screen showing the
changes made last will appear.)
Rotate the search dial and select the item to be set.
The cursor (*) on the menu screen moves and the item No. on the display flashes.
When the dial is rotated clockwise, the item No. is incremented from 001 002
003 004 and so on; when it is rotated counterclockwise, the item No. is decremented.
The search dial should be used in jog mode if at all possible.
Hold down the PLAY button and press the FF (next major item) or REW (previous
major item) buttons to select the menu by major item.
While holding down the search button, rotate the search dial at the position where the
change is to be made.
The setting No. now flashes.
When the dial is rotated clockwise, the setting value is incremented; when it is rotated
counterclockwise, it is decremented.
Release the search button when the setting is completed.
The setting value on the menu screen and display flashes.
During the SHTL mode, the item moves if the search dial is not at the STILL position.
Repeat steps 2 through 4 to change another item.
Press the SET button.
The changes are now stored in the memory.
To return the items to the settings established before the changes were made, press
the MENU button.
To return the setup settings to the factory (default) settings, press the RESET button
while the menu is displayed.
The following message will now appear:
SETUP-MENU INIT SET
YES<PLAY>/NO<STOP>
When the PLAY button is pressed, the factory
settings are restored.
4 3
<Note>
When the RESET button is
pressed to return to the
factory settings, the factory
settings are restored only for
the user file currently being
used and other user files are
not affected.
The changed SYSTEM
menu contents are recorded
even if the MENU button is
pressed.
1 6
2
-44-