Panasonic AJ-D950 VCR User Manual


 
Setup menus
USER menu
<TAPE PROTECT>
Item
Setting
No.
Superimposed No. Superimposed
display
display
400 STILL 0000 0.5s
TIMER
0001 5s
0002
10s
0003 20s
0004 30s
0005 40s
0006
50s
0007
1min
0008
2min
401
SRC 0000 STEP
PROTECT
0001
HALF
402 DRUM
0000
OFF
STDBY
0001 ON
Description
This selects the time to be taken until the unit goes into the tape
protection mode when it is left standing in the stop or search still
(JOG/VAR/SHTL) mode. (Unit: s = second, min = minute)
This selects the operation during the tape protection mode
when the unit is left standing in the still status during the
search mode (JOG/VAR/SHTL).
0: STEP FWD.
1: HALF LOADING.
<Note>
When STEP FWD is selected, the unit automatically goes into
the HALF LOADING mode when the total time for which the
unit is left standing in the still status reaches 30 minutes.
This selects whether the head drum is to be rotated when
operation is transferred to the standby OFF mode.
0: Head drum remains stationary.
1: Head drum is rotated.
The underline on the setting item denotes the initial setting.
<Note>
The cumulative standby time at the same tape position increases when transmitting
programs or otherwise using identical materials repeatedly.
USER menu
<TIME CODE>
Item Setting
No.
Superimposed
No.
Superimposed
display display
Description
500
VITC
BLANK
501
VITC
POS-1
0000
BLANK
This selects whether to output the VITC data to the positions
0001
THRU
selected by VITC POS-1 in 501 and VITC POS-2 in 502.
0: Data is not output.
1: Data is output.
525 mode
This sets the position where the VITC signal is to be inserted.
0000
10L
(The same line as for VITC POS-2 in 502 cannot be selected.)
0006
16L
0010
625 mode
0000
20L
7L
0004
11L
0014
21L
The underline on the setting item denotes the initial setting.
-54-