Filter
Top Products
Setup menus
USER menu
<AUDIO> (continued)
Item
Setting
No.
Superimposed
No.
Superimposed
display
display
Description
727
PB FADE
728
EMBEDDED
0000 OFF
This selects whether to superimpose the audio data onto the
AUD
0001
ON
serial output.
0: Data is not superimposed.
1: Data is superimposed.
729
MONITOR
MIX L
730
MONITOR
MIX R
731 CUE OUT
0000 OFF
SEL 0001
ON
0000 AUTO
0001
CUT
0002
FADE
0000
OFF
0001
CH1+2
0002 CH3+4
0000
OFF
0001
CH1+2
0002 CH3+4
This selects the processing method for the audio edit points
(IN point, OUT point) during playback.
0: According to the status during recording.
1: Forced CUT
2: Forced FADE
This selects the mixed signal for the headphone monitor.
0: No mixing.
1: CH1 and CH2 are mixed and output to the left channel.
2: CH3 and CH4 are mixed and output to the left channel.
This selects the mixed signal for the headphone monitor.
0: No mixing.
1: CH1 and CH2 are mixed and output to the right channel.
2: CH3 and CH4 are mixed and output to the right channel.
This selects whether or not the cue audio signal is to be output
to the main line output in the search mode.
0: CUE AUDIO is not output.
1: CUE AUDIO is output.
(This applies only when setup menu No. 721 (MONI CH
SEL) is not set to
“
MANU
”
.)
The underline on the setting item denotes the initial setting.
AJ-PD950 USER menu
The following setup menu is displayed when the AJ-PD950 is used.
Item Setting
No.
Description
Superimposed
No.
Superimposed
display
display
012 SYS
0000
422
This sets the unit
’
s recording/playback format.
FORMAT
0001
411
0: The 422 (50M) format is selected.
0002
420P
1: The 411 (25M) format is selected.
2: The 420P format is selected.
<Notes>
608
SDI OUT
SEL
0000
0001
002
Editing is not possible in the 411 mode.
In the 625 mode, 420P cannot be selected.
COMPNT
This selects the SERIAL OUT signal format.
COMPST
0: Component 4:2:2 signals are output.
420P
1: Composite signals are output. (Option)
2: Component 4:2:2P signals are output.
The underlining indicates the factory setting.
-60
-