Panasonic AJ-HD150 VCR User Manual


 
– 55 –
USER menu
<BASIC> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
022 PB FORMAT 0000 1080I
0001 422
0002 411
0003 DV
0004 DVCAM
030 HD 0000 59.94
FREQUENCY 0001 60
031 OUT REF 0000 AUTO
0001 INPUT
0002 HD_REF
0003 SD_REF
The underline on the setting item denotes the initial setting.
This selects the playback tape format.
0: For playing back a 1080i mode tape.
1: For playing back a DVCPRO50 422 mode tape.
2: For playing back a DVCPRO 411 mode tape.
3: For playing back a DV tape.
4: For playing back a DVCAM tape.
<Note>
Before the PB FORMAT menu item setting is to be changed,
eject the tape first and then proceed.
This selects the HD frequency.
0: The 59.94 Hz frequency is selected.
1: The 60 Hz frequency is selected.
The field frequency set here is used only when no signals
corresponding to the OUT REF setting are input. If the
corresponding signals are input, the field frequency matches
the field frequency of the input.
This selects the video output reference.
0: When the HD REF input signal is present, this signal
serves as the reference.
When the HD REF input signal is not present but the SD
REF input signal is present, the SD REF signal serves as
the reference.
When neither the HD REF input signal nor SD REF input
signal is present, the HD serial signal serves as the
reference.
When none of the HD REF input, SD REF input and HD
serial signals are present, the internal sync signal serves
as the reference.
1: When the HD serial input signal is present, this signal
serves as the reference.
2: The signal which has been supplied to the HD REF IN
connector serves as the reference.
3: The signal which has been supplied to the SD REF IN
connector serves as the reference.
Setup menus