Panasonic AJ-HD150 VCR User Manual


 
– 62 –
Setup menus
USER menu
<EDIT> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
311 JOG REV 0000 –4.1
MAX 0001 –1.85
0002 –1
0003 –0.43
312 POSTROLL 0000 0s
TM 0001 1s
0002 2s
0003 3s
0004 4s
0005 5s
320 EDIT 0000 N-DEF
RPLCE1 0001 CH1
0002 CH2
0003 CH1+2
321 EDIT 0000 N-DEF
RPLCE2 0001 CH1
0002 CH2
0003 CH1+2
322 EDIT 0000 N-DEF
RPLCE3 0001 CH1
0002 CH2
0003 CH1+CH2
323 EDIT 0000 N-DEF
RPLCE4 0001 CH1
0002 CH2
0003 CH1+CH2
The underline on the setting item denotes the initial setting.
This sets the maximum JOG REV speed.
0: –4.1× speed
1: –1.85× speed
2: –1× speed
3: –0.43× speed
<Notes>
The maximum speed is set to –1× when the dial on the front
panel is operated.
At any speed setting other than 1 (–4.1×), the phase cannot
be synchronized from an editing controller which synchro-
nizes the phase using the JOG command.
This sets the postroll time.
Any time from 0 to 5 seconds can be set in 1-second units.
This sets the channel assignments for the controller’s analog
audio preset when editing the digital audio of the VTR using a
controller which does not have a digital audio edit preset
control function.
This selects the channel concerned when the VTR CH1 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
The same type of setting as setup menu No. 320. This selects
the channel concerned when the CH2 edit preset is set in
compliance with the ON or OFF presetting for the analog
audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
The same type of setting as setup menu No. 320. This selects
the channel concerned when the CH3 edit preset is set in
compliance with the ON or OFF presetting for the analog
audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
The same type of setting as setup menu No. 320. This selects
the channel concerned when the CH4 edit preset is set in
compliance with the ON or OFF presetting for the analog
audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with analog CH1 or CH2 edit preset.
Setup menus