Filter
Top Products
100
733*
1
REC CUE
For selecting the input signals to be recorded
on the CUE track.
0000 CUE
: CUE IN
0001 CH1
: Audio input CH1 signals
0002 CH2
: Audio input CH2 signals
0003 CH3
: Audio input CH3 signals
0004 CH4
: Audio input CH4 signals
0005 CH5
: Audio input CH5 signals
0006 CH6
: Audio input CH6 signals
0007 CH7
: Audio input CH7 signals
0008 CH8
: Audio input CH8 signals
0009 CH1+2
:
Audio input CH1 and CH2 mixed signals
0010 CH3+4
:
Audio input CH3 and CH4 mixed signals
0011 CH5+6
:
Audio input CH5 and CH6 mixed signals
0012 CH7+8
:
Audio input CH7 and CH8 mixed signals
0013 CH1
j
8
:
Audio input CH1 to CH8 mixed signals
734*
1
PB FADE
For selecting how to process the audio edit
points (IN points and OUT points) during
playback.
0000 AUTO
: The status established during
recording is followed.
0001 CUT
: Forcibly cut
0002 FADE
: Forcibly faded
735
HD EMBD
AUD
For selecting whether to superimpose the
audio data on the HD serial output.
0000 OFF
:
The audio data is not
superimposed.
0001
ON
:
The audio data is superimposed.
736
SD EMBD AUD
For selecting whether to superimpose the
audio data on the SD serial output.
0000 OFF
:
The audio data is not
superimposed.
0001
ON
:
The audio data is superimposed.
737
MONI MIX
For selecting the mixed signals for the
headphone monitor (Lch and/or Rch).
0000
OFF
: Neither the Lch nor Rch signals
are mixed.
0001 L
: Only the Lch signals are mixed.
0002 R
: Only the Rch signals are mixed.
0003 L/R
: Both the Lch and Rch signals
are mixed.
<Notes>
• At the OFF setting, the signals to be output to monitor
L (or monitor R) are switched to CH1, CH2, CH3 and
so on each time the “L” or “R” button is pressed. The
selected signals are displayed below the audio level
meter.
• At the L, R or L/R setting, the signals of a multiple
number of channels can be mixed and output. When
the number key corresponding to the channel whose
signals are to be monitored is pressed while the “L”
(or “R”) button is held down, that channel is selected.
The selected channel is displayed below the audio
level meter. (Alternatively, the same steps can be
taken to de-select a channel which has already been
selected.) However, only up to 2 channels among the
CH1-CH4 channels and up to 2 channels among the
CH5 to CH8 channels can be selected.
Setup menus
The underlining (__) denotes the factory setting mode.
<AUDIO>
(continued)
No./Item Description of setting No./Item Description of setting
730*
1
REC CH6
For selecting the input signals to be recorded
on the audio CH6 track.
0000 CH5
: Audio input CH5 signals
0001 CH6
: Audio input CH6 signals
0002 CH7
: Audio input CH7 signals
0003 CH8
: Audio input CH8 signals
0004 CH5+6
: Audio input CH5 and CH6
mixed signals
0005 CH7+8
: Audio input CH7 and CH8
mixed signals
731*
1
REC CH7
For selecting the input signals to be recorded
on the audio CH7 track.
0000 CH5
: Audio input CH5 signals
0001 CH6
: Audio input CH6 signals
0002 CH7
: Audio input CH7 signals
0003 CH8
: Audio input CH8 signals
0004 CH5+6
: Audio input CH5 and CH6
mixed signals
0005 CH7+8
: Audio input CH7 and CH8
mixed signals
732*
1
REC CH8
For selecting the input signals to be recorded
on the audio CH8 track.
0000 CH5
: Audio input CH5 signals
0001 CH6
: Audio input CH6 signals
0002 CH7
: Audio input CH7 signals
0003
CH8
: Audio input CH8 signals
0004 CH5+6
: Audio input CH5 and CH6
mixed signals
0005 CH7+8
: Audio input CH7 and CH8
mixed signals
738
CH1 CUE SEL
For selecting the CH1 output status of the
main signal line in the search mode.
0000 OFF
:
The CUE signal is not output.
0001 ON
:
The CUE signal is output.
<Note>
For details on the audio output statuses, refer to “Audio
outputs in the search mode” on page 103.
*1:This item is not displayed when the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.