Filter
Top Products
113
Display position
The position of the characters superimposed on the
display can be changed using (C HPOS) and
(C VPOS) on the <TC SHIFT> menu and the ADJ
dial.
F3F2
Superimpose screen
The control signals, time code, etc. are displayed on
this screen using abbreviations.
TCR
22
:
22
:
22
:
22
TV monitor
TCR
22
:
22
:
22
:
22
TV monitor
TCR
22
:
22
:
22
:
22
TV monitor
Abbreviations
CTL:
Control signal count value
TCR:
Time code data recorded in the SBC area
TCR.:
Time code data recorded in the VAUX area
UBR:
User’s bit data recorded in the SBC area
UBR.:
User’s bit data recorded in the VAUX area
TCG:
Time code data of the time code generator
UBG:
User’s bit data of the time code generator
Operation mode
The VTR’s operation mode can also be displayed
using (DISPLY) on the <TC SHIFT> menu.
F4
TCR
22
:
22
:
22
:
22
STOP
TV monitor
VTR operation mode
Characters displayed
The background of the characters superimposed on
the display screen can be changed using (C
TYPE) on the <TC SHIFT> menu.
F5
TCR
22
:
22
:
22
:
22
TV monitor
TCR
22
:
22
:
22
:
22
TV monitor
<Note>
When the 23/24 Hz mode has been selected as the
system menu item No.25 (SYSTEM FREQ) setting,
the time code and other information superimposed on
the MONITOR and VIDEO OUT3 connectors are not
displayed.
<Note>
[T
2
R], [T
2
R.], [U
2
R] or [U
2
R.] is displayed when the
data has not been read correctly from the tape.