Panasonic AJ-HD1700 VCR User Manual


 
44
Function menus
<HOME>
Operation mode (speed) display
This indicates the current operation mode (including
the speed display).
Display
EJECT
Operation mode
Eject mode
STANDBY OFF Standby OFF mode
T.RELEASE Tension release mode
STOP Stop mode
PREROLL Preroll mode
PLAY Playback mode
PLAY
i
Special playback (playback phase
adjustment) mode (FWD direction)
PLAY
j
Special playback (playback phase
adjustment) mode (REV direction)
REC Recording mode
JOG
REV/STILL/FWD
Jog mode
VAR (speed)
[
j
4.9
to
i
4.9]
Variable mode
SHTL (speed)
[
j
32.0
to
i
3
2.0
]
Shuttle mode
FF Fast forwarding mode
REW Rewinding mode
EDIT Editing mode
AUTO EDIT Automatic editing mode
PREVIEW Preview mode
When function F6 (VARMEM) on <HOME SHIFT> is “ON”
DSPD (speed)
[
j
1.0
to
i
2.0
]
Initial speed setting of variable memory
DSMP (speed)
[
j
1.0
to
i
2.0
]
Playback speed memory mode of variable
memory
DPLY (speed)
[
j
1.0
to
i
2.0
]
Playback mode of variable memory
DPRV (speed)
[
j
1.0
to
i
2.0
]
Preview mode of variable memory editing
DEDT (speed)
[
j
1.0
to
i
2.0
]
Execution mode of variable memory editing
REVIEW Review mode
Indicator
SCH This lights when the SCH phase of the SDREF
signal is within the prescribed range.
Description of setting
CF This lights when color framing is locked.
DF This lights during recording or playback in the
drop frame mode.
<Note>
If the time code data could not be read properly
(“T
¢
R” is displayed), the display of the previous
status is held.
Remaining tape/total tape display
The lengths of the remaining tape and total tape of the
inserted cassette are displayed in increments of minutes.
REM 10/ 92
Cue time display
This displays the currently registered cue time. (For
details on the cue time operation, refer to “Cue point
registration, preroll and cue-up.”)
Cue time operations can be performed on the HOME
screen only.
Status display 2
<Note>
Slight errors may occur. The remaining tape value
blinks when less than 3 minutes of the tape remain.
(10 minutes remaining on a 92-minute tape)
Example:
Total tape
Remaining tape
Time counter displays
Display
CTL
Description
CTL counter data
TCG Time code data of time code generator
UBG User’s bit data of time code generator
tcg When the time code data of time code
generator is preset
ubg When the user’s bit data of time code
generator is preset
TCR/T
¢
R
Time code data of time code reader
UBR/U
¢
R
User’s bit data of time code reader
If the time code data or user’s bit data could not be
read out properly, “T
¢
R” or “U
¢
R” is displayed. If the
CTL signal is present, the time code data is
supplemented by CTL.
Field mark
[1st field: “ ”/2nd field: “.”]
(This does not appear when the
i
0.3
k
or
j
0.3
k
speed is exceeded.)
Drop frame mark (59/60 Hz mode only)
[Non-drop frame mode: “:”/drop frame
mode: “.”]
Variable memory mode indicator
This is displayed when the (VARMEM) function
button on <HOME SHIFT> is set to “ON.” While
is lighted, variable memory operations can be
performed at any time.
(For details, refer to “Variable memory function.”)
VM
F6
TCR 00:00:00:00.