Filter
Top Products
59
Function menus
<INSERT>
Registering the edit points
After the edit IN and OUT points have been
registered, the and buttons light.
Automatic editing and manual editing
• When the editing mode has been selected (the
button is lighted), automatic editing or
manual editing can be performed even after the
INSERT screen has been exited.
• After the edit IN and OUT points have been
registered (the and buttons are lighted),
the tape can be prerolled to an IN point or cued up
to an IN or OUT point even after the INSERT
screen has been exited.
OUTIN
INSERT
OUTIN
Function
button/item
Switching
method
Corresponding setup
menu item
F1
V
F2
A5
,
A1
F3
A6
,
A2
F4
A7
,
A3
F5
A8
,
A4
F6
T
,
CUE
Toggle
___
Description of setting
For setting the editing mode to ON or OFF and selecting
the editing channels.
With the exception of the function button (F1), two channels
are allocated.
Use the SHIFT button to move the marker up or down, and
while specifying the channels, press the function buttons to
select them. Pressing the SHIFT button on other screens
serves a different purpose (screen switching) from its use
here.
For setting the editing mode to ON or OFF.
When one of the channel displays is highlighted, the
INSERT editing mode is set to ON, and the INSERT button
lights.
Setting
___
F1
SHIFT
F2 F3 F4 F5 F6
IN point
OUT point
AUDIO IN point
Marker
AUDIO OUT point
The INSERT editing mode and editing channels are
selected on this menu screen.
INSERT