Filter
Top Products
39
RQT6981
Editing
The lock symbol appears
closed when the disc is
write-protected.
Press [2] to set disc
protection and press
[ENTER].
[Note]
≥ Computer data and still pictures (JPEG, TIFF) cannot be
erased.
≥ Erase does not work if one or more programs are protected.
Press [2] to select
“Start
”
and press
[ENTER].
DISC SETTING
RETURN
ENTER
SELECT
Prog # 7
Used Total Mark
Free
100 : 58
0 : 42 (SP)
Disc Protection
Enter Title
On
Format
Erase all programs
[Note]
≥ Do not disconnect the AC power supply cord while the
message “Finalizing the disc” is on the television. This
will render the disc unusable.
≥ Finalizing takes up to 15 minutes.
After finalizing..
≥ You cannot record or perform editing such as giving titles
and erasing programs.
≥ Programs longer than 5 minutes are divided into about
five-minute chapters.
≥ These DVD-R can be played on other Panasonic DVD
players, but this is not guaranteed. Play may not be possible
due to the player you are using, the DVD-R, or the condition
of the recording. Play the disc using this unit if you
experience problems with other equipment.
Visit Panasonic’s homepage for more information about
DVDs. http://www.panasonic.com/playDVD-R
[Note]
≥ Do not disconnect the AC power supply cord while the
message “Formatting the disc” is on the television. This
can render the disc unusable.
≥ Formatting normally takes a few minutes, however it may
take up to a maximum of 70 minutes.
≥ The contents on the disc are erased when you format it even
if you have set program or disc protection.
≥ It may not be possible to use a disc on this unit if you cannot
format it.
≥ Formatting cannot be performed on DVD-R or CD-R/RW.
To stop formatting
Press [RETURN].
You can cancel formatting if it takes more than 2 minutes. The
disc must be reformatted if you do this.
Press
[ENTER]
to complete
the procedure.
Press [2]
to select
“Yes
”
and
press
[ENTER].
Press
[ENTER]
to complete
the procedure.
Press [2]
to select
“Yes
”
and
press
[ENTER].
Press [2] to
select “Start
”
and
press [ENTER].
Formatting starts.
≥ A message appears when
formatting is finished.
Press [2] to
select “Start
”
and
press [ENTER].
Finalizing starts.
≥ A message appears when
finalizing is finished.
Press [2] to
select “Yes
”
and
press [ENTER].
All programs
and play lists
are erased.