Filter
Top Products
59
RQT6981
Reference
Specifications
Recording system: DVD video recording standards
(DVD-RAM),
DVD video standards (DVD-R)
Optical pick-up: System with 1 lens, 2 integration
units (662 nm wavelength for DVDs,
790 nm wavelength for CDs)
Recordable discs: 12 cm (5
q
) 4.7 GB DVD-RAM discs
12 cm (5
q
) 9.4 GB DVD-RAM discs
8 cm (3
q
) 2.8 GB DVD-RAM discs
12 cm (5
q
) 4.7 GB DVD-R discs
8 cm (3
q
) 1.4 GB DVD-R discs
(for General Ver. 2.0)
Recording time: Max. 6 hours (using 4.7 GB disc)
XP: 60 minutes
SP: 120 minutes
LP: 240 minutes
EP: 360 minutes
Discs played: 12 cm (5
q
) 4.7 GB DVD-RAM discs
12 cm (5
q
) 9.4 GB DVD-RAM discs
8 cm (3
q
) 2.8 GB DVD-RAM discs
12 cm (5
q
) 4.7 GB DVD-R discs
8 cm (3
q
) 1.4 GB DVD-R discs
(for General Ver. 2.0)
DVD-VIDEO discs
CD-Audio discs (CD-DA)
Video CD discs
DVD-AUDIO discs
CD-R/CD-RW discs
(CD-DA, Video CD, MP3 formatted
discs)
SD card slot: SD Memory Card Slot
Compatible media: SD Memory Card, Multi Media Card
PC card slot: PC Card Type II
Compatible media: A PC Card adaptor conforming to PC Card
Standards, ATA Flash PC card, PC Card
adaptor (SD Memory Card, Multi Media
Card, Compact Flash, Smart Media, Mem-
ory Stick, xD picture card, Micro drive),
Mobile hard disk
Format: FAT12 or FAT16
Image format: JPEG conforming to DCF (Design rule for
Camera File system)
(sub sampling; 4:2:2 or 4:2:0)
TIFF (Uncompressed RGB chunky)
DPOF Compatible
Number of pixels: 320 a 240 to 6144 a 4096
Thawing time: Approx. 7 sec. (2 M pixels, JPEG)
Video system
TV system: NTSC system, 525 lines, 60 fields
Recording system: MPEG2 (Hybrid VBR)
Input: LINE (pin jack)a3, 1.0 Vp-p; 75 ≠
S connectora3 Y: 1.0 Vp-p; 75 ≠
C: 0.286 Vp-p; 75
≠
Output: LINE (pin jack)a2, 1.0 Vp-p; 75 ≠
S connectora2 Y: 1.0 Vp-p; 75 ≠
C: 0.286 Vp-p; 75
≠
Component video output (480P/480i):
Y: 1.0 Vp-p; 75 ≠
P
B: 0.7 Vp-p; 75 ≠
P
R: 0.7 Vp-p; 75 ≠
Antenna reception input:
TV Channel: 2ch–69ch, 75 ≠
CATV Channel: 1ch–125ch, 75 ≠
Audio system
Recording system: Dolby Digital (XP/SP/LP/EP)
LINEAR PCM (XP mode only)
Input: LINE (pin jack)a3
Reference input: 309 mVrms
FS: 2 Vrms (1 kHz, 0 dB)
Input impedance: 47 k≠
Output: LINE (pin jack)a2
Reference output: 309 mVrms
FS: 2 Vrms (1 kHz, 0 dB)
Output impedance: 1 k≠
(Load impedance: 10 k≠)
Number of channels: Recording: 2 channels
Playback: 2 channels
Other input/output connectors:
Digital audio optical output connector
(PCM, Dolby Digital, DTS)
Operating temperature range:
5 oC–40 oC (41 oF–104 oF)
Operating humidity range:
10 %–80 % RH (no condensation)
Clock unit: Quartz-controlled 12-hour digital dis-
play
LASER Specification
Class I LASER Product
Wave length: 775–815 nm 655–666 nm
Laser power: No hazardous radiation is emitted with
the safety protection
DV input: IEEE 1394 Standard, 4 pin
Power supply: AC 120 V, 60 Hz
Power consumption: 28 W
Dimensions: Approx. 430 (W)k79 (H)k283 (D) mm
[Approx.16
15
/
16
q
(W)
k
3
1
/
8
q
(H)
k
11
3
/
16
q
(D)]
(excluding protrusions)
Mass: Approx. 3.9 kg (8.58 lbs)
[Note]
Specifications are subject to change without notice.
Mass and dimensions are approximate.
1. Damage requiring service—The unit should be serviced by
qualified service personnel if:
(a)The AC power supply cord or AC adaptor has been damaged;
or
(b)Objects or liquids have gotten into the unit; or
(c)The unit has been exposed to rain; or
(d)The unit does not operate normally or exhibits a marked
change in performance; or
(e)The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servic-
ing to authorized servicing personnel.
3. Replacement parts—When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to per-
form safety checks to confirm that the unit is in proper working
condition.
For product information or assistance with product operation:
In the U.S.A., contact the Panasonic Customer Call Center at
1-800-211-7262, or e-mail consumerproducts@panasonic.com,
or the website (http://www.panasonic.com).
In Canada, contact the Panasonic Canada Inc. Customer Care
Centre at 1-800-561-5505, or visit the website
(www.panasonic.ca), or an authorized Servicentre closest to you.
Power consumption in standby mode: approx. 3.2 W
Product Service
Product information