Filter
Top Products
[POSITION] menu
ENGLISH - 33
[ASPECT]
You can switch the aspect ratio of the image.
1) Press
to select [ASPECT].
2) Press
or the <ENTER> button.
z
The [ASPECT] individual adjustment screen is
displayed.
3) Press
to switch the setting.
z
The aspect ratio changes as follows each time
the button is pressed.
[AUTO] [NORMAL] [WIDE]
[NATIVE] [S16:9]
[FULL] [V FIT] [H FIT]
Attention
z
When an image in the aspect ratio of 4:3 is output
in [FULL], the image may deform or the image at
the edge section may be hidden. To respect the
creator’s intension, project the image in the original
aspect ratio.
Note
z
[AUTO] is displayed only when NTSC, 525i (480i)
is input.
z
[S16:9] is displayed only when the wide signal of
the aspect ratio 16:10, 16:9, and 15:9 is input.
z
The projected image may not change even when
the aspect mode is changed, depending on the
input signal.
z
Some aspect ratios may not be available depending
on the input signal.
z
If an aspect ratio, which is different from the aspect
ratio for the input signals, is selected, the image
appears differently from the original image.
z
If using the interface box in places such as cafes
or hotels to display programs for a commercial
purpose or for public presentation, note that
changing the aspect ratio to change the screen
pictures may be an infringement of the rights of
the original copyright owner for that program under
copyright protection laws.
z
In [AUTO] setting, when an identication signal for
the aspect ratio is included in the input signal, the
optimal aspect ratio is set automatically.
z
In S-video, video, or component (YC
B
C
R
/YP
B
P
R
)
signal, there is a case that [AUTO] is not displayed.
z
When the image horizontally longer than the 16:9
aspect ratio of the cinema vision size is projected,
the black region may appear at upper and lower
sections of the screen.
Aspect mode Screen
[NORMAL]
Outputs the full image
without any hidden
section by using whole
effective area of the
image signals output
from <DIGITAL LINK>
terminal in either of the
horizontal or vertical
direction, by keeping
the aspect ratio.
Input signal
Projection screen
[WIDE]
Outputs by setting the
aspect ratio to 16:9.
When 15:9 signal,
16:9 signal, or 16:10
signal is input, the
image is output without
changing the aspect
ratio.
Input signal
Projection screen
[S16:9]
Outputs the image with
the aspect ratio 16:9 to
the screen size of 4:3.
Input signal
Projection screen