Filter
Top Products
20
RQT8248
Enjoying in a car
Enjoying video in the back seat with the Headrest Mounting Bracket
You can enjoy video in the back seat attaching the unit to the back of the front seat.
≥
Please insert the disc before attaching the unit to the headrest bracket.
1 Attaching the headrest bracket to the front seat.
2 Attaching the monitor holder.
≥
Do not attach or detach while driving, and do not attach in the following locations,
otherwise it may result in injury or traffic accidents:
–anywhere other than the back of the seat
–in a location that interferes with the driver’s view or operation of the car
–in a location that interferes with the operation of an airbag
–in a location that interferes with the driving instruments
≥
Make sure that the bracket belt is securely fastened, and check the lock on the unit.
In the event of an accident, sudden acceleration, or braking, the unit could become loose and cause injury.
1 Fold the monitor down towards the front
of the unit and attach the monitor holder.
2 Rotate the monitor backwards so the
screen is facing out, and lock into
place with the monitor holder.
Side view
Headrest
Mounting
Bracket
(included)
2 Close the buckle and adjust the belt
until it fits tightly around the headrest.
1 Adjust the headrest so there is an open
space of about 3 cm.
Attach to the seat
so that the label
side of the bracket
can be seen from
the rear of the
seat.
Monitor holder
(included)
Check that the monitor is locked into position.
Detaching the monitor
After use, detach the monitor
holder from the unit. You can
store it in the bracket.
Press the monitor holder
as shown to detach it.
Enjoying in a car