Filter
Top Products
[PICTURE] menu
66 - ENGLISH
Settings
[CONTRAST]
You can adjust the contrast of the colors.
1) Press
to select [CONTRAST].
2) Press
or the <ENTER> button.
z
The [CONTRAST] individual adjustment screen
is displayed.
3) Press
to adjust the level.
Operation Adjustment Range
Press
.
Brightens the screen
and makes the color
of image deeper.
Maximum
value +31
Press
.
Darkens the screen
and makes the color
of image lighter.
Minimum
value –31
Attention
z
Adjust [BRIGHTNESS] rst when you need to
adjust the black level.
[BRIGHTNESS]
You can adjust the dark (black) part of the projected image.
1) Press
to select [BRIGHTNESS].
2) Press
or the <ENTER> button.
z
The [BRIGHTNESS] individual adjustment
screen is displayed.
3) Press
to adjust the level.
Operation Adjustment Range
Press
.
Increases the
brightness of the
dark (black) parts of
the screen.
Maximum
value +31
Press
.
Reduces the
brightness of the
dark (black) parts of
the screen.
Minimum
value –31
[COLOR]
You can adjust the color saturation of the projected image.
1) Press
to select [COLOR].
2) Press
or the <ENTER> button.
z
The [COLOR] individual adjustment screen is
displayed.
3) Press
to adjust the level.
Operation Adjustment Range
Press
. Deepens colors.
Maximum
value +31
Press
. Weakens colors.
Minimum
value –31
[TINT]
You can adjust the skin tone in the projected image.
1) Press
to select [TINT].
2) Press
or the <ENTER> button.
z
The [TINT] individual adjustment screen is
displayed.
3) Press
to adjust the level.
Operation Adjustment Range
Press
.
Adjusts skin tone
toward greenish color.
Maximum
value +31
Press
.
Adjusts skin tone
toward reddish purple.
Minimum
value –31
[COLOR TEMPERATURE]
You can switch the color temperature if the white
areas of the projected image are bluish or reddish.
1) Press
to select [COLOR
TEMPERATURE].
2) Press
or the <ENTER> button.
z
The [COLOR TEMPERATURE] individual
adjustment screen is displayed.
3) Press
to switch the [COLOR
TEMPERATURE].
z
The setting will change as follows each time
you press the button.
[DEFAULT]
*1
[USER1] [USER2]
[9300K] [3200K]
(100 K increments)
*1: When [PICTURE MODE] is set to [USER] or [DICOM
SIM.], [DEFAULT] cannot be selected.
Note
z
When the [COLOR MATCHING] (
page 88)
adjustment is set to any setting other than [OFF],
the color temperature setting is xed to [USER1].
z
The color temperature numerical values are
guidelines.