Filter
Top Products
20
21
Quick Start
Guide
First Time Setup
Identifying Controls
V
I
E
R
A
C
A
S
T
V
I
E
R
A
T
O
O
L
S
V
I
E
R
A
L
i
n
k
Remote control
Switches TV On or Off (Standby)
Viewing from SD Card (p. 28-31)
Lights the CH and VOL buttons
for 5 seconds. Press again to turn
off the CH and VOL button lights.
Changes the input mode (p. 32)
Switches to input terminal
that has “GAME” label. (p. 32)
VIERA Link menu (p. 48-49)
Displays Sub Menu (p. 25, 42)
Colored buttons
(used for various functions)
(for example, p. 24, 28, 48)
Volume up/down
Sound mute On/Off
Changes aspect ratio (p. 26, 64)
Switches to previously viewed channel
or input modes.
External equipment operations
(p. 49)
Closed caption On/Off (p. 25)
Selects Audio Mode for TV viewing (p. 25)
Exits from menu screen
Displays Main Menu (p. 40)
Displays VIERA CAST screen (Home
screen) (p. 34)
Displays VIERA TOOLS (p. 27)
Selects/OK/Change
Returns to previous menu
Channel up/down
Displays or removes the channel
banner (p. 26)
Operates the Favorite channel list
function. (p. 26)
Numeric keypad to select any channel
(p. 25) or press to enter alphanumeric
input in menus. (p. 24, 32, 36, 38, 48,
50, 52, 54, 56, 59, 60)
Use for digital channels. (p. 25)
First Time Setup (Remote control registration)
Make sure to register your remote control with the following procedure when the TV is turned on for the
first time.
Turn the TV On with the POWER button (Display Unit)
(The Tuner Box power will be also turned on).
(Display Unit)
Please have your remote control ready
with batteries installed. Continue?
Por favor tenga su mando a distancia listo
con las baterías instaladas. Continuar?
Veuillez installer les piles dans
la télécommande. Continuer ?
CHVOL
INPUT/OK
MENU
Confirmation screen will be displayed.
Press the ‘OK’ button and the ‘1’ button simultaneously
for at least 3 seconds.
If there is no registered remote control, the “Remote control registration” screen
is displayed every time the TV is turned on.
V
I
E
R
A
C
A
S
T
V
I
E
R
A
T
O
O
L
S
V
I
E
R
A
L
i
n
k
Remote control registration
Press the ‘OK’ button and the ‘1’ button
simultaneously for at least 3 seconds.
Registro del mando a distancia
Presione el botón ‘OK’ y el botón ‘1’
simultáneamente, durante al menos 3 segundos.
Enregistrement de la télécommande
Appuyez simultanément sur les touches ‘OK’ et ‘1’
pendant au moins 3 secondes.
Error or
Time out
(30 sec)
Remote control registration failed.
Try registering again?
Registro fallido.
Intentar nuevamente?
Enregistrement de la télécommande échoué.
Enregistrer de nouveau ?
CH
VOL
INPUT/OK
MENU
Select
“Yes”
You can also go to step
selecting “No”.
(Use control panel of Tuner Box,
when Remote control is not
available)
Succeed
Remote control registration
completed successfully.
Press OK.
Registro del mando a distancia
completado satisfactoriamente.
Presione OK.
Enregistrement de la télécommande réussi.
Appuyez sur OK.
ok
Remote control registration
(p. 61)
Identifying Controls (Continued)
This TV uses a RF remote control.
The remote control is operable when it is not facing the Display Unit or Tuner Box.
As the radio waves reflect on walls or other obstacles, the remote control is operable even there are obstacles
between the remote control and the Tuner Box.
Transmission Range
Use the RF remote control within the range of 7 m from the TV tuner.
The range may be shortened if there are any obstacles or the surrounding environment or building structure affects
the transmission.
Interference from Other Devices
If the TV tuner is too close to another device, failures such as malfunction or slow remote control response may occur
due to the radio wave interference.
Keep the transmitter away from the following devices as much as possible:
Wireless LAN, Microwaves, Telephones, Other electric devices