Filter
Top Products
9
S VIDEO
AV3
VIDEO
L R
VIDEO
OUT
S-VIDEO
OUT
AUDIO
OUT
R
L
S VIDEO
AV3
VIDEO
LR PC
STRF TV/AV
//
SD CARD
PUSH-EJECT
PC CARD EJECT
S-VIDEO 4 pin terminal
Luminance earth
Luminance in
Chrominance in
Chrominance earth
Connections
It is possible to connect a variety of additional equipment to this TV. The following pages detail how to connect external
equipment to the front and rear of the TV.
Once your equipment is connected, use the following procedure to view the input:
Press the TV/AV button.
Whilst the on screen selector keys are displayed, press coloured
buttons to select the AV source you wish to view.
Red button : AV1 Audio, Video, S-Video terminals
Green button : AV2 Audio, Video / Component terminals
Yellow button : AV3 Audio, Video, S-Video / PC terminals
Blue button : AV4 Audio, Video / Component terminals
The on screen selector keys that appear clear after a few seconds.
If you want to select an input when the keys are not shown, press
any coloured button and the keys will reappear.
Note:
The volume level of the headphones can be adjusted by selecting “Headphone volume” from the Sound menu.
Notes:
• You can also select an AV source using the TV/AV button on
the front panel of the TV.
Press the TV/AV button repeatedly until you reach the AV
source you wish to view.
• When a Monaural VCR is used, connect the Monaural Audio
cable to the AUDIO L terminal.
• Additional equipment and cables shown are not supplied
with this TV set.
TV/AV
TV
C
N
OK
123
456
789
0
How to connect the Headphones / AV3 terminals
Less than
10 cm
Less than
10 cm
Ferrite core (Small size) (supplied)
Connect the S-VIDEO
or VIDEO terminal.
Headphones
(Optional)
S-VIDEO VCR
CAMCORDER
VCR
DVD PLAYER
Example of input signal source
M3 plug
S-VIDEO
VIDEO
AUDIO