Filter
Top Products
Fixing the display unit to the stand
Lock the casters before
installing the display unit.
Press down the caster
switch to lock the caster.
Unlock
Lock
1) Spread a clean cloth over a level floor or base, and place on it the
display unit face down.
2) Remove the screws and covers.
Keep them in a safe place for possible future use.
1
Insert the two poles at the top of the stand into the holes in the base of
the display unit as shown in the illustration below.
2
Insert the four screws, two on each side, into the holes in the back of
the display unit and fasten them into the holes in the inserted poles.
3
Assembly screw (M5-30)
3-4