Filter
Top Products
26
4. To clear all alarm records, press the A or B button to
select CLEAR where the cursor is positioned, then
press the [HOME/SET] button.
5. Press the [SET UP/ESC] button to return to the previous
ALARM SETUP menu.
■ Alarm Schedule
This item lets you enable or disable the system alarm func-
tion.
1. Move the cursor to the ALM SCHEDULE parameter by
pressing the C or D button.
2. Select ON or OFF by pressing the A or B button.
ON: Enables system alarm function.
OFF: Disables system alarm function.
The factory default setting is OFF.
3. To set the timer, press the [HOME/SET] button while the
cursor is positioned on ON.
The cursor moves to the timer editing area.
4. Press the C or D button to move the cursor to the
desired position, then adjust the time when the alarm is
to be activated by pressing the A or B button.
Notes:
• If the same time is set for start and stop time, the
alarm is always enabled.
• You can set the timer to extend into the next day, for
example, 22:00 - 6:00.
5. Press the [SET UP/ESC] button to move the cursor to
ON position.
ALARM SETUP
The procedure described below let you set the modes
when an alarm is received.
Move the cursor to ALARM SETUP in the SETUP MENU
by pressing the C or D button and then press the
[HOME/SET] button.
The ALARM SETUP menu as shown in the figure
appears on the monitor screen.
■ Alarm Recall
There are 100 alarm records stored in chronological order
in 10 pages of table.
The tables also indicate the alarm mode.
1. Move the cursor to ALM RECALL by pressing the C or
D button and then press the [HOME/SET] button.
The ALARM RECALL table appears on the monitor
screen.
The table lists the activated alarm modes (ALM-MODE)
as follows:
TRM ✽✽: Interface Alarm
CH-LOSS: Video Input Signal Loss Alarm
SITE: Camera Site Alarm
PC ✽: PC Command Alarm
2. Press the D button to select the next page of the table.
3. Press the C button to back up to the previous page of
the table.
ALARM SETUP
ALM RECALL *
ALM SCHEDULE OFF
CAM SITE ALM OFF
VIDEO LOSS ALM ON
SW-LOSS ALM OFF
ALM DISPLAY ON
ALM OUTPUT DUR 2SEC
ALM BUZZER DUR 2SEC
ALM MODE-MLT ALM-IND
DWELL TIME 2SEC
ALM MODE-SPT ALM-SPOT
DYNAMIC REC OFF
ALM REC MODE MODE0 REAL
ALARM RECALL 1 OF10
NO. DATE TIME CAM ALM-MODE
10. JAN 1. 97 12:00:00 16CH TRM 12
9. DEC 12. 96 4:00:00 10CH SITE
8. DEC 12. 96 3:00:00 8CH SITE
7. DEC 12. 96 2:00:00 7CH SITE
6. DEC 12. 96 1:00:00 6CH TRM 1
5. DEC 11. 96 15:00:00 5CH TRM 5
4. DEC 11. 96 14:00:00 4CH TRM 14
3. DEC 11. 96 13:00:00 3CH TRM 7
2. DEC 11. 96 12:00:00 2CH CH-LOSS
1. DEC 11. 96 12:00:00 1CH CH-LOSS
DISPLAY ( )NEXT ( )PRE
ALARM SETUP
ALM RECALL *
ALM SCHEDULE ON 0:00- 0:00
CAM SITE ALM OFF
VIDEO LOSS ALM ON
SW-LOSS ALM OFF
ALM DISPLAY ON
ALM OUTPUT DUR 2SEC
ALM BUZZER DUR 2SEC
ALM MODE-MLT ALM-IND
DWELL TIME 2SEC
ALM MODE-SPT ALM-SPOT
DYNAMIC REC OFF
ALM REC MODE MODE0 REAL