Panasonic WJ-FS616C Home Theater Server User Manual


 
30
Secret View
When the camera image is displayed in the spot mode on
the spot monitor, the multiscreen monitor is enabled to skip
the step in sequence or display a blackout in multiscreen
for that selected channel image.
This function is called Secret View and the item lets you
enable or disable this function on the multiscreen monitor.
1. Move the cursor to the SECRET VIEW parameter.
2. Select either ON or OFF.
OFF: Disables the secret view function.
ON: Enables the secret view function.
The factory default setting is OFF.
3. After finishing the setting, press the [SET UP/ESC] but-
ton to return to the previous SETUP MENU.
Camera Display Position Setting
This item lets you assign the position where the camera
image will be displayed on the multiscreen monitor.
1. Move the cursor to DISPLAY POSITION, and then press
the [HOME/SET] button.
The table shown in the figure appears on the monitor
screen.
2. Move the cursor to the desired channel number by
pressing the C or D button.
3. Select the numbers of the cameras to be displayed by
pressing the A or B button.
The images of the selected cameras are displayed one
after another on the monitor screen.
Note: The number can be assigned directly by press-
ing the Camera Number (1 – 16) buttons.
4. Press the [SET UP/ESC] button to return to the previous
MULTI OUTPUT SETUP menu.
Note: This operation only affects the camera display
positions.
It has no effect on the camera channel, recording
order or sequence order.
Sequence Mode
This item lets you select the sequence pattern for display
on the multiscreen monitor.
Refer to Sequence Setup on page 37 for further details.
1. Move the cursor to the SEQUENCE MODE parameter.
2. Select the desired sequence mode.
SEQ1: Spot Sequence
SEQ2: Multi Sequence
SEQ3: Multi Sequence
The factory default setting is SEQ2.
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16