Filter
Top Products
9
@6 Direction Buttons (UP/DOWN/LEFT/RIGHT)
These buttons are used to manually operate the Pan/Tilt
Head, move the cursor position in the setup menu of
the video multiplexer, or to select an area for Electric
Zooming.
UP: Upward
DOWN: Downward
LEFT: Left
RIGHT: Right
@7 Auto Button (AUTO)
This button is used to activate the auto panning function
if the camera is equipped with the specific future.
@8 Iris Buttons (IRIS, CLOSE/OPEN)
Close or open the lens iris of cameras equipped with
the specified lens.
When these buttons are pressed at the same time, the
lens iris is reset to the factory default settings.
@9 Focus Buttons (FOCUS, NEAR/FAR)
Adjusts the lens focus of cameras equipped with the
specified lens.
When these buttons are pressed at the same time, the
lens focus is automatically set if the camera is
equipped with the specific future.
#0 Zoom Buttons (ZOOM, TELE/WIDE)
Adjusts the lens zoom of cameras equipped with the
specified lens.
#1 Setup/Escape Button (SET UP/ESC)
This button is used in the video multiplexer’s setup
operation. Pressing this button for two seconds or more
will open or close the video multiplexer’s setup menu on
the monitor screen.
While the setup menu is displayed on the monitor
screen, press this button to execute the currently
selected setting and return to the previous setup menu.
#2Lock Switch (LOCK OFF/ON)
This switch can be used to lock out operation of the
video multiplexer panel controls.
While this switch is in ON position, control from the
video multiplexer is disabled.
#3 VCR Control Buttons
These buttons are used for remote control of the VCR
that is connected to the video multiplexer.
The buttons function as shown below.
: Rewind
: Pause
: Fast Forward
: Reverse Play
: Stop
: Play
: Decreases recording duration
: Increases recording duration
: Record
/
/