Filter
Top Products
23
■ Basic System Connection
The Video Multiplexers WJ-FS309, WJ-FS316, WJ-FS409 and WJ-FS416 are connected with cameras, video monitors and a
Time Lapse VCR. A typical connection example is shown below. The ALARM/REMOTE connector is described later.
• The figure shows the WJ-FS309/FS409. The WJ-FS316/FS416 has 16 VIDEO IN and OUT connectors each.
• Refer to the operating instructions of each system component for connection and operation.
• The WJ-FS309 and WJ-FS316 are designed for black and white pictures only. If color cameras are connected to the unit,
pictures are displayed in black and white.
With certain monitor types, color noise may appear in the picture.
• In case of connecting multiple devices compatible with the Panasonic Security Data mode, connect the unit in a daisy-
chain configuration. The allowable connecting devices are up to 16 in a system. The maximum allowable cable length of
the system is approximately 500 m (1 650 ft).
SYSTEM CONNECTIONS
Cameras
Video Monitor
Video Monitor
System Controller
VIDEO INPUT
VIDEO OUTPUT
Video Multiplexer (WJ-FS309/FS409)
VIDEO INPUT
VIDEO OUTPUT
CAMERA SWITCH
Time Lapse VCR or
Digital Disk Recorder
(Example: WJ-HD100)
SIGNAL
GND
ALARM/REMOTE
OUT
IN
VIDEO
987654321
987654321
PLAY IN
REC OUT
SPOT OUT
DATA
CAMERA
SW IN
MULTI
SCREEN OUT