Filter
Top Products
Pelco Manual C551M (4/98) 15
7.0 SPECIFICATIONS
ELECTRICAL
Input Voltage: 12 VAC from a 120 VAC, 60 Hz wall transformer provided with
unit (230 VAC, 50 Hz with KBD9000-X)
Power
Consumption: 2.5 vA
Connectors: Two video BNC connectors (video input and output)
Input Impedance: 75 ohms or high impedance (Hi Z), switchable
Control Method: 15-pulse train (pulse width modulated) superimposed on the
video signal during the vertical blanking interval by the KBD9000
control transmitter. Pulse train occupies 1 TV line period.
Pulse Amplitude: Approximately 1 Vp-p added to video signal, 333 kHz nominal
Input Video
Level: 1 Vp-p nominal; 2 Vp-p maximum at less than 75% APL;
1.5 Vp-p maximum at 90% APL
System
Bandwidth: Less than 2 dB down at 10 MHz (exclusive of cable)
GENERAL
Construction: Aluminum
Finish: Gray polyester powder coat
Environment: Indoor; -10° to 120°F (-23° to 49°C)
Dimensions: See Figure 6.
Weight: Unit Shipping
1.95 lb (0.90 kg) 5.0 lb (2.27 kg) approximate
Rating: NEMA 1
(Design and product specifications subject to change without notice.)
Figure 6. KBD9000 Dimension Drawing
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES
8.10 (20.57)
2.21
(5.61)
CAMERA
AUX
PAN
KBD9000
7.16
(18.19)
75
Ω
IN OUT
HiZ
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.