Filter
Top Products
Pelco Manual C551M (4/98) 5
2.0 DESCRIPTION
The KBD9000 Transmitter/Controller is a desk top unit that provides up to 16 re-
mote control functions. It operates without the need for control cables other than for
a dedicated video cable for the normal transmission of a remote camera signal to
the local monitoring and control position. Coaxitron
®
control lends itself to applica-
tions where short-to-medium distances are involved and where equalization of cable
losses is not required.
Check your receiver/driver manual for active functions.
Typically, control functions are:
1. Pan Left
2. Pan Right
3. Tilt Up
4. Tilt Down
5. Zoom In
6. Zoom Out
7. Focus Near
8. Focus Far
9. Iris Open
10. Iris Close
11. Camera Power On/Off
12. Auto/Manual Scan
13. AUX 1
14. AUX 2
15. AUX 3
16. AUX 4
Functions 1 through 10, 15 and 16 are momentary; that is, they are only actuated
while the associated control switch on the KBD9000 is operated. Functions 11, 12,
13 and 14 are latching; that is, camera power, auto scan, and auto/ manual iris are
latching functions and remain on until turned off. The latching iris function is not
dedicated, and with proper interfacing, it can be used for some other latching func-
tion. Alternately, AUX 1, 2, 3 and 4 may be used as momentary functions to control
such things as lights or gates with proper external interfacing. Up to ten functions
can be operated simultaneously. Functions 11 through 16 must be used individu-
ally; although any one of these functions may be used simultaneously with func-
tions 1 through 10.
KBD9000 is an improved version of the original Coaxitron
®
transmitter/controller.
Improvements include the following features:
1. When used with a Pelco CX900TLC Test Local Control Plug-in Module, pro-
vides troubleshooting capability for both the receiver and the KBD9000.
2. Pan/tilt, zoom, and camera power control are included on the main receiver
board, which eliminates malfunctions due to incorrect wiring or broken wires.