Filter
Top Products
74 C662M-E (5/03)
DATA TRANSLATOR CONFIGURATION
The Step 3 and Step 4 screens in the I/O Manager Configuration are used to configure the data translator. Step 3 configures
the recorder channels with the selected data translator. Step 4 translates the event type from one type to another, if necessary.
Figure 87. Data Translator Step 3 Screen
Table J. Data Translator Event Destination
Term Definition
Server The server name that the data translator is connected to.
Port The port number on the data translator that relates to a specific channel. If several channels are selected,
this number specifies the related port of the first channel. For example, if 8 channels are selected, port 1
relates to channel 0 and so on.
Device The logical device number that the data translator is connected to and configured on the I/O Handler.
OK Confirm the configuration.
Clear Delete all configurations from the selected channel.