Filter
Top Products
C4675M (2/11) 9
FRONT PANEL
The unit’s front panel includes indicators and controls. The controls let you perform most unit functions without the remote control or mouse
(refer to Figure 2). For information on using the remote control, refer to Remote Control on page 13. For information on using the mouse and for
general unit operation, refer to the DX4700/DX4800 Server Operation/Configuration manual.
Figure 2. Front Panel
Access Door: Provides access to the power button and optical CD/DVD drive.
Channel and Camera Control Buttons:
• Button [1]: Only selects camera 1.
• Buttons [2 to 8], Eight-Channel Unit or [2 to 16], Sixteen-Channel Unit: Selects the respective camera and its alternate
function. (Press the Shift button to access the alternate function).
[2] OSD: Displays or hides the toolbar.
[3] COPY: Copies recorded video data to the target media.
[4] MARK: Sets the beginning point from which to search recorded data.
[5] FOCUS-: Decreases camera focus.
[6] FOCUS+: Increases camera focus.
[7] IRIS-: Closes the camera iris.
[8] IRIS+: Opens the camera iris.
[9] ALM OFF: Turns off the active alarm state.
[10] INFO: Displays or hides the System Information list.
[11] LOG: Displays or hides System Log list.
[12] AUX: Sends an auxiliary command.
[13] SET: Starts the PTZ configuration mode.
[14] CLR: Clears a configured event.
[15] PATTERN: Assigns the recorded PTZ actions to the user-specified pattern number.
[16] PRESET: Assigns the position of the selected camera to a user-specified preset number.
Remote Sensor: Communicates between the HVR and remote control.
System Status Indicators:
• NET: Blinks when the network is connected.
• BACKUP: Glows when the backup and erase media process is active.
• HDD: Blinks when the hard drive is accessed.
• ALARM: Glows when the alarm out is in progress.