Filter
Top Products
6 C623M-ADDEN (3/04)
Figure 4. Remove Left and Right Side Plates
2. Attach the handles to the rack ears using the four provided 10-32 x .375-inch Phillips flat head screws. Refer to Figure 5.
3. Using two of the supplied #4 sheet metal Phillips .375-inch pan head screws for each side, attach the rack ears to the unit.
Figure 5. Attaching Rack Ears and Handles
Equipment Rack Mounting
To install the unit in an equipment rack:
1. Remove the 12 screws fastening both left and right side plates to the unit. Save the side plates and screws for possible future
use.
(4) SCREWS,
10-32 X .375-INCH
PHILLIPS, FLAT HEAD
WITH WASHERS
RACK EAR
(4) SCREW,#4, SHEET METAL, PAN HEAD,
PHILLIPS BLACK, .375-INCH (2 EACH SIDE)