Filter
Top Products
AUTO SCART
The Auto Scart function enables auto-detection of AV devices that are connected to the TV’s Scart connector.
ON Enables Auto Scart switching in BDS Mode.
OFF Disables Auto Scart switching in BDS Mode.
MONITOR OUT
ON Allows audio & video output from TV via relevant AV connectors (if available).
OFF Disables both Audio & Video output from the TV (to prevent illegal copying).
BLANK CHANNEL
The Blank Channel function disables the display of video on the TV, but does not affect the audio output. This
function can be used for audio applications (example: Off-air radio transmission, music channels, and so on) which do
not necessarily require the display of video.
ON The current programme is blanked
OFF The current programme is not blanked (normal visible; DEFAULT value)
BLANK CHANNEL can be set for every channel. Use [P+ / P-] to go through all the programmes and set the
desired status per channel. The programme number is visible in the top left corner.
Low Battery Check
This television set has a special feature which checks the battery power level of a TV Remote Control, and indicates if
the battery is low and requires changing.
(Note: The Low Battery Check function works only with certain models of Remote Controls. Please check with the
Philips sales representative if the Remote Control used with this TV supports this function)
To activate the Low Battery Check function, hold the TV Remote Control in front of the TV, and press and hold
the OK button on the Remote Control for at least 5 seconds. A message will appear on the TV screen to indicate if
the battery power level is OK, or if it is Low. If the message indicates that the battery level is low, it is recommended
to change the batteries of the Remote Control immediately.