Filter
Top Products
SATELLITE CODES
Philips .....................4007, 4011, 4020,
..................................4037, 4048, 4059
Pioneer ...............................4021, 4059
Planet ...........................................4061
Promax .........................................4037
Prosat ...........................................4019
Quadral ..............................4029, 4044
Sabre ............................................4037
SAT ....................................4027, 4038
Satcom ...............................4026, 4051
SEG ....................................4030, 4034
Siemens ........................................4008
Skymaster ................4019, 4044, 4051
Sony ...................................4017, 4018
Sunstar .........................................4043
Telefunken ...................................4034
Telesat ..........................................4051
Thomson ............................4037, 4059
Triad .............................................4027
Triasat ..........................................4040
Universum .........................4008, 4049
Ventana .........................................4011
Vortec ...........................................4034
Vtech ............................................4027
Xcom Multimedia ........................4065
Xsat ....................................4006, 4065
REMOTE
CONTROL CODE ENTRY
LIST
37
T
ROUBLESHOOTING
No Power
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert
the plug into the outlet and push the POWER button again.
• Check that the outlet is not on a wall switch.
• Be sure the fuse is not blown on the AC power strip, if one is being used.
No Picture
• Check antenna connections. Are they properly secured to the TV's ANT
75Ω plug?
• Check the TUNER MODE control for the correct tuner setting.
•Try running the Auto Program feature to find all available channels.
• Press the AV button on the remote to make sure the correct signal source is
selected (FRONT or Current Channel).
No Sound
• Check the VOLUME buttons.
• Check the MUTE button on the remote control.
• If you’re attempting to hook up auxiliary equipment, check the audio jack
connections located on the front of the TV.
Remote Does Not Work
• Check the batteries. If necessary, replace them with AA Heavy Duty (Zinc
Chloride) or Alkaline batteries.
• Clean the remote control and the remote control sensor window on the TV.
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert
the plug into the outlet and push the POWER button again.
• Be sure the fuse is not blown on the AC power strip, if one is being used.
• Check to be sure the TV outlet is not on a wall switch.
TV Displays Wrong Channel or No Channels Above 13
• Repeat channel selection.
• Add the desired channel numbers (using the CHANNEL EDIT control) into
the TV’s memory.
• Check to be sure the TUNER MODES are set to the CABLE option and run
the Auto Program feature to find all available channels.